Russian Culture and Civilization under the Tsars Essay

Russian Culture and Civilization under the Tsars - Essay Example Each banner also has a cross on the support pole, again lending to a religious cause. The flags seem to symbolize peace in their beliefs, which is odd given the battle. Some figures do not carry banners; one holds a decorated wooden cross with rounded edges and a representation of Christ being crucified painted or etched into it. Another carries a flag with a representation of Christ on it, the white of the flag surrounded by unreadable red lettering. The back half of the flag is missing and aflame; it is burning in the hands of the carrier. One man in the back, behind the leading line of religious figures, holds a large bound book that may be a Bible, though there is no title on the cover. Another carries a lit candle, while at the other end of the religious figures, a woman holds a two-colored lamp of green and gold that is decorated with crosses on top, signifying her support for the religious cause behind this battle. The ages of those dressed in robes varies; a man with white ha ir and long beard stands facing the battling soldiers, holding a sword with determination and sadness in his eyes, but he does not actively attack. Some figures have elaborate gold embellishment on their robes, while others are clad in simple robes of white or light colors only. Others, as well, grown men of middle age, hold their own banners and flags or candles and look on with expressions of sadness and dismay, as though to say that they believe in their cause, but they worry and pray for the souls that will be lost. All the figures carrying religious banners or items appear to look alike, with their dark hair in the same style, as well as their facial hair, also all in the same style. Towards the back of the religious line, there is an older religious man with a cap, clad in blue; his expression is unreadable. An almost ethereal, heavenly glow appears to surround the persons that wear robes. In the front attacking line, a youthful boy clad all in white with no weapon in hand has an expression on his face of one that is in pain. This is most likely due to the soldier standing in front of him with his sword raised high, ready to strike; however, there is an absence of blood on the youth or the ground. The flag support being carried by the soldier closest to the walls has been broken, the sharp jagged ends sticking out. The flag itself is of a bright orange-red color with a white bird on it, possibly a dove or some other animal that is symbolized in religious writings. As with the banners, the flag has what appears to be a religious â€Å"figure† on top of the pole, cast in metal. The soldiers at the front of the walls are actively attacking the opposing army, with expressions ranging from fear to frenzied rage. All wield axes and strike with fury and vengeance. The soldiers look polished and clean, ready for battle. Others lie dead on the ground, their expressions ones of peace and serenity. All are clad in the same uniform with very slight difference in the attacking army uniforms vs. the opposing army; one must look carefully at the helmets to see that one is different from another. It is clear, however, from the expressions on some of the soldiers’ faces that they did not expect the strength or ferocity of the attackers to be so violent; their shock, fear, and horror are almost palpable. Some figures do not belong to either the religious group or the soldiers. Perhaps

Integrated research Essay Example for Free

Integrated research Essay Introduction A family comprises of mother, father, children, grandparents and others united together by blood or adoption. A family results from a marriage. Family structures are built through marriage and that is why it is said that proper marriages lead to proper families . The family functions that are outlined in marriage settings are almost similar and that the challenges that are experienced in the marriage are those challenges that will eventually impact negatively on the family. This research will outline various challenges that marriage as a practical identity possesses and their eventual implications in the family. Marriage Marriage can be defined as the interpersonal relationship between most commonly a man and woman who are united legally via social, religious are or governmental recognition. There are different types of marriages; †¢ Arranged marriages-this is where marriage partners are chosen by the society e. g. monarchies †¢ Boston marriage-marriage between two partners not necessarily for sex e. g. between two women. †¢ Common-law marriage- involves a class of interpersonal status where people united by a common believe on marriage law marry on that basis †¢ Digital marriage-a kind of marriage where two people with no connection in their ‘gaming’ lives come together within a virtual community and declare that they are married †¢ Covenant marriage- in this case two people come together as partners in union and make a long life commitment for the marriage. Divorce is made more difficult here. In some jurisdictions, the legal concept of marriage has been recently expanded to emerging social beliefs such as same sex marriages. Marriages are considered part and parcel human stage of life and most people believe that at one point in their lives they should get married. People marry for different reasons ranging from; to achieve social and economic stability, to have and nurture children, to form a family unit and finally to legitimize sexual relations. Marriage is considered the main factor and the pillar of a family. Better families result from better marriages as the people involved are given enough guidance to form the next generation of the family. The persons in the family learn good values and teachings from their parents hence this will ensure that any subsequent marriages are strong and stable. Contemporary critics also suggest that modern marriages have become extremely very disadvantageous for women. When it comes to economic or social considerations, women do not compare with women. Contrastingly, the continued bias towards women will mean that in the near future, mean will be on the other side of the fence-where women were in the last century. This is evident from the fact that modern policies and divorce laws have been specifically designed to protect women. However, with the emergence of same sex rights, the situation will be more complicated due to the legal prohibitions and social taboos that deny the practices full recognition. Loss Loss of one of the marriage partner leads to termination of the marriage . Loss may result form death, divorce or any other factor that will mean that one of them is left alone. This is usually disastrous for the family setting where one parent or spouse is left alone to meet all the family requirements, in a case where the children still young and need to be taken care in terms of education provision, health, love, shelter etc. Grief usually results from loss and it is very various legal systems and societal family arrangements offer different legal directions and guidance on handling properties (finances, assets etc. ) developed by the couple incase one dies or incase of a divorce. Some cultures believe that both the wife and the husband are entitled to equal property rights. Other societies also prohibit children especially the girls from inheriting the family’s assets including land. A widow may also lose family property if she decides to remarry. Partners in a marriage are jointly responsible and liable for the debts of the marriage practice and therefore if there is any misunderstanding on the responsibility of the same, then, it might be solved on an individual basis. The era of the myth ‘doctrine of necessities’ where the husband remains the sole provider for the family is gone. Today, all partners in the marriage share responsibilities equally depending on the income generation level of each.

Exploring Psychological Explanations of Criminal Behaviour Essay

It has been long the interest of psychologists in understanding the factors that determine psychopathy (Skeem et al., 2011). Family factors, whether they being genetic or environmental, have always been classified preponderant in the development of psychopathy (Millon et al., 2002, cited in Hildebrand, 2004). Researchers have looked and established that psychopaths are at a higher risk to be violent offenders than normal population (Theodorakis, 2013). Likewise, researchers have demonstrated that among family factors, a large number of children in the family was the strongest predictor of offending (Farrington et al., 2006). This study aims to explore whether a large family size is a contributing factor to the development of psychopathy and offending. 1.1 The research problem A review of literature shows that there is very little research and evidence as regards to the correlation between large family size and psychopathy (Farrington et al., 2006). Thus, the research problem is to investigate the extent large family size impacts the development of psychopathy. 1.2 The purpose of the study The purpose of the study is to determine whether family size, previously acknowledged having an effect on delinquency, likewise exerts an impact on the development of psychopathy. There is very little and very limited research that speaks to this theory, thereafter the conduction of this study will allow to further people’s understanding of the causes or what triggers psychopathy and violent offending and what can be done to prevent it. 1.3 The objectives of the study Taking into account the above reasoning, three research hypotheses were formulated. Hypothesis 1: There will be a significant positive relationship between ... ..., C.J., Lilienfeld, S.O. (2011). Psychopathic Personality: Bridging the Gap Between Scientific Evidence and Public Policy.Psychological Science in the Public Interest. 12 (3) 95-162. doi: 10.1177/1529100611426706 http://pspi.sagepub.com. - Theodorakis, N. (2013). Psychopathy and its relationship to criminal behaviour . IALS Student Law Review. 1 (1) 47-56. Retrieved from file:///C:/Users/u1273529/Downloads/1705-2277-1-PB%20(1).pdf. - Tibbetts, S. G. and Gilbert, T. D. , 2006-11-01 "The Effects of Family Size on the Development of Delinquency" Paper presented at the annual meeting of the American Society of Criminology (ASC), Los Angeles Convention Center, Los Angeles, CA . 2013-12-16 from http://citation.allacademic.com/meta/p124920_index.html - Wadsworth, M. (1979). Roots of Delinquency: Infancy, Adolescence and Crime. Oxford: Martin Robertson.

Mechanical Engineering Career Paper

| Mechanical EngineeringRobert MolinowskiVocollect703 Rodi Road, Pittsburgh, PA, 15235(412) 829-8145| | | | | Pd. 6/7 Career Paper December 15, 2011 Mechanical Engineering According to projected job employment in the year, 2018, mechanical engineering will have an estimated quarter of a million jobs nationwide. This is an increase of roughly 6% between 2008 and 2018. As the need for better, more economical necessities, a need for mechanical engineers will always be on the uplift. Many mechanical engineers â€Å"research, design, develop, manufacture, and test tools, engines, machines, and other mechanical devices. (Bureau, 4). This branch, within the engineering field, happens to be the broadest category. Mechanical engineers are seen throughout all aspects of life, from agricultural production to maintenance of engines of cars and machines. With mechanical engineering, most people will be stationed in an office building/manufacturing facility. Others will have the benefit of travel ing to job sites to see what their team needs to design for the specific company. A normal, typical work week would consist of working a total of forty hours. This, however, would change if the company was on a tight time schedule to get something produced for someone. Only then will the average mechanical engineer work more than forty hours a week. â€Å"We also spend time working with engineers in manufacturing and design to plan design iterations and product fixes that can be made quickly and cheaply. † (Camenson, 85). Mechanical engineering is, â€Å"†¦very much a â€Å"people-person† job. † (Camenson, 90). Everything written down in logbooks will be subject to engineer scrutiny, and that would look bad on the source’s end. If mechanical engineers were to write/draw something that could take different meanings, for example, an ink blot, this could cause a serious setback in how you go about your future in mechanical engineering. If the offense is serious enough, it could cost someone their job. This shows that you must be careful in how you go about your job in that you don’t know who’s going to see your drawings. Women, in the field of mechanical engineering are at a disadvantage when it comes to comparing men to women. Women are more content to gossiping in the office instead of working on their job. â€Å"Patience is essential. You have to check most of your ego at the door when you walk into a meeting you’ve called, but retain enough leadership skills to keep the meeting focused on its objectives. † (Camenson, 90). This quote accurately describes one of the challenges that women have while working in this field. I can be a witness to this when I went on my job shadow. There were few females working and the ones that did would do little and chit-chat with one another for great lengths of time. When it comes to men, they dominate the field in that they â€Å"outnumber women by a ratio of 3:1† (Bureau, 16). Men can be more communicative with one another during meetings as I witnessed also. Men, as I saw, were more scrutinizing during meetings but they were subtle about it. One thing of advice, â€Å"Learn how to speak in front of a group. It doesn’t matter if the only chance you get is talking to high schoolers about not drinking and driving- that counts, and probably more than giving a lecture on acoustics or materials technology. (Camenson, 94). To sum things up, working in the field of mechanical engineering is highly competitive, be careful what you design, you don’t know who could see it, and that women are at a disadvantage for various reasons when being compared to men in the field. When it comes to mechanical engineering, a detailed course study of engineering and physics is necessary if you are to want to â€Å"make it big† in the field. For just about any field of engineering, especially mechanical, â€Å"a bachelor’s degree in engineering is necessary. † (Bureau, 6). Having flexibility in an engineer’s study program allows him/her to boast a wide variety of fields of engineering for their resume. â€Å"A design course is usually the way to go but having a course study that included mathematics and the physical and life sciences would further benefit the engineer since they’ll be a more defined engineer. † (Bureau, 6). Many colleges offer two or four year degree programs in engineering. For example, Penn State offers what they call a 2+2 program. The program lets the student do his undergraduate studies at any of the branch campuses throughout Pennsylvania for the first two years. After those two years, the student will then be admitted to the main campus in University Park to complete their graduate studies. The main difference between the set of two years is that for the first two years, you’ll be doing your core courses as well as courses designed for your intended major. When you get to the main campus, that’s where you’ll focus primarily on your specific field of engineering with other students from across the state. â€Å"Businesses often look for college graduates who studied through a four year program instead of a two year. † (Bureau, 6). Graduate training is essential if you were to want to earn promotions within a certain company. This training isn’t required for most entry-level jobs. All fifty states and the District of Columbia require that any engineer who offers their services to the public to have a license or they can be fined heavily for it. These licenses are good for up to four years and must be renewed much like a driver’s license. â€Å"Most states accept out of state licensees. † (Bureau, 7). Engineers should be able to work well with others and communicate on a very high level, both orally and in writing. To stay up-to-date with the latest technologies, â€Å"many companies and firms will send their engineers to training as part of the job duties. † (Hutchinson, 4). An employment prospect for mechanical engineering graduates is the highest in any of the engineering fields. â€Å"Federal agencies such as the U. S. Army Corps of Engineers have a large number of mechanical engineers on their staff. † (Hutchinson, 4). â€Å"Over the period of ten years, from 2008 to 2018, employment in the field of engineering is expected to increase roughly eleven. † (Hutchinson, 5). This is good for me in that I will be entering the field within the next ten years, hopefully. With the high demand for new and improved products, the mechanical engineering career won’t see a downfall for quite some time. There is, however, a minor setback in the globalization of engineering. That is, â€Å"With the rise of the Internet, it has become much easier for firms to use mechanical engineers in other parts of the world to do a lot of the engineering work that once done solely by mechanical engineers in this country. † (Hutchinson, 5). This could prove to be a major setback if I would want to work overseas someday. This is something that comes up with just about any profession that I would want to work in. The mechanical engineering field, I know for a fact, took a hard hit during the recent recession. I found this information out from the use of my job shadow. Mechanical engineers are one of the top paid occupations for out-of-college graduates. â€Å"Starting salaries for a beginning mechanical engineer career will find salaries in the mid-range of engineering salaries according to 2009 data provided by the National Association of Colleges and Employers. † (Hutchinson, 5). This kind of a salary is tremendous when compared to other occupations just within engineering itself. With the kind of salary I’ll be making when I become a mechanical engineer, I’ll be able to pay off most of my student loans well before my goal, which is by age thirty. â€Å"Earnings for engineers vary significantly by specialty, industry, and education. With mechanical engineering having the highest salary in the lowest 10% of the job corps. † (Bureau, 13). Having a higher degree, such as a Master’s instead of a Bachelor’s will give you an edge in how you’re paid. Obtaining that higher degree ensures that you have a vast amount of knowledge in that specific field of knowledge. Before the invention of the computer, every design was drawn up by hand and took a much longer amount of time to complete. A vast knowledge in art would’ve been necessary to draw something as elaborate as a headset, for example. When the computer began making its march across the technological community, mechanical engineers went crazy because, they could now do their drawings on the computer instead of drawing it by hand. Now that they had their computers to work on, it was a matter of time before programs began surfacing that would further benefit a mechanical engineer and his drawings. With the invention of the three-dimensional printer, mechanical engineers can now draw their product on the computer program, then take that drawing and have it printed out in 3D to see what it would look like in reality. The 3D printer is good in that you can print out a small scale version of the product and see if it’ll be good enough to withstand various testing. I guess we owe it to Steve Jobs and Mike Wozniak for inventing the first computer. Without them, mechanical engineers might still be doing drawings by hand. â€Å"Mechanical Engineers work closely with several other engineering disciplines such as civil engineering, electrical engineering, and aerospace engineering. † (Hutchinson, 6). This just goes to show how closely related the fields of engineering truly are. In fact, all of the fields of engineering are connected to one another in one way shape or form. When it comes to the auto industry, â€Å"mechanical engineers work closely with automotive engineers. † (Hutchinson, 6). This shows that mechanical engineers work in all different kinds of environments. Other related professions include: aerospace engineering, aeronautical engineering, engineering technicians, computer scientists, physicists and astronomers. † (Hutchinson, 6). This final quote resembles the fact that mechanical engineers work with a wide variety of other professions. It is that a mechanical engineer is a piece that keeps a wide variety of occupations running at tip-top shape. Works Cited Works Cited Bureau of Labor Statistics, U. S. Department of Labor, Occupational Outlook Handbook, 2010-11 Edition, Engineers, on the Internet at http://www. bls. gov/oco/ocos027. htm (visited September 21,2011) Camenson, Blythe. Real People Working in Engineering. Lincolnwood, IL: VGM Career Horizons, 1998. Print. Hutchinson, Jonathon. â€Å"Mechanical Engineering Job Outlook: Employment and Salary Information. † Job Outlook: Employment and Salary. Online Degrees, 2006. Web. 23 Sept. 2011. http://www. onlinedegrees. org/calculator/salary/mechanical-engineers Job Shadowing Job Shadowing I arrived at Vocollect Industries off of Rodi Road in Penn Hills a little after eight in the morning. I was greeted warmly by the man whom I shadowed, Mr. Molinowski. He showed me around his specific floor of which he works on in Vocollect. He ushered me into his office and began discussing what he had planned out for toady. He overviewed what he did within the company itself. He designs products for customers from anything from a microphone to a computer. This could only be possible by the works of a computer program called, Pro-Engineer. Pro-E, as engineers call it, can turn any two-dimensional drawing into a three-dimensional drawing were the designer can be as detailed with the drawing as he wants to. In this industry, it’s bad if there is little detail so, lots of detail is key to producing the best product. After the overview of his job and the day’s events, Robert then showed me around the labs they use to test the integrity of their products, not as a whole, but rather is little individual parts. There were many labs of which I got to personally see myself. Most of the labs had computer simulations of testing the integrity of the product in various ways. For example, the product of which was being tested was their new edition of a headset and a terminal electrical power station. This headset and terminal combination is going to be used in the manufacturing industry over in China. The different labs tested for how long a certain feature of either the headset or terminal would function properly for before it failed (broke). Other labs included applying extreme heat and cold onto the parts. The lab that caught my eye the most was the one that counted the number of times until a cord that’s connected to the terminal broke through the entire cord. When I first saw the count, in the morning, it was a mere 31,586. I asked if I could check it again before I left and when I checked it for the second time in the afternoon, the count was up to 123,874. I asked Mr. Molinowski if the second number was high because, I would think that the second count wouldn’t last much longer before it broke. He answered that this test usually goes up in excess of half a million times before it breaks apart. They do the tests to simulate the usage on the part for a five year period. This reminded me of when I learned of the various tests a car goes through before it hits the road. The test has to simulate the entire life of a car, much like they were testing for the entire life of the specific part of the headset or the terminal. After we toured all throughout the labs, we settled back in his office so he could show me his Pro-E drawings he had for the headset. Someone other than him was in charge of drawing the terminal. I asked him how long it took him to make such a detailed sketch of the headset. He said that this design took him a little over two hundred days to complete because he had to design all the small components that make up the headset, then he had to assemble them all together. By this time it was now time for a brief meeting about the upcoming month of December with the customer before the big, weekly, two-hour long meeting. The brief meeting was only a half hour but, a lot of stuff was said and discussed. They had the customer on the phone so he could put in his voice in the meeting. In this meeting, something major was brought up. Since, in Chinese culture, they give the entire country the last two weeks of our American calendar year off for the Chinese New Year’s, a time constraint was evident because nothing would be able to get done from December 23-January 1. What made matters worse is that the customer would be out of his office three days earlier, December 20. Thus essentially putting the project on hold until the New Year. With only twenty-seven days remaining until the customer shuts down for the year, things at Vollect will be very hectic. Now it was time for the long meeting, which I was already warned of at the beginning of the day. I was introduced and welcomed warmly by Bob’s fellow employees. Bob and his boss, Rich, presented to the other designers on the project design team. For two hours, they deliberated over how they could improve on the present drawing by going over every square inch of the drawing. After the meeting it was time for lunch. After we got back from lunch, Bob let me try out the Pro-E program on his computer. With my knowledge of the program from my CAD class, Pro-E came naturally to me. I told him about how in the CAD class we are designing a model replica of the old Civic Arena. He asked if I had any drawings made in Pro-E and I said, â€Å"No. Just a program called AutoCAD. † He offered his assistance and we both began working on a design for the Civic Arena. It wasn’t difficult for him to design it since he’s had so much experience with the program and that’s pretty much all he does most of the day. The only part that proved to be difficult was that every five minutes or so the program would crash without us saving the drawing. We learned that after the fifth time of crashing that we should start saving our drawing after every little thing we do. After roughly two and a half hours of messing around with the program and drawing, we had ourselves a not-to-scale model of the Civic Arena. This helped me out greatly because now I can take what I learned from Bob about the Pro-E program back to the CAD class and draw up the scale model of the Civic Arena. Interview Q&A Interview Q&A 1. What influenced you to become a mechanical engineer? What influenced me the most was that I wanted to be a guy who designs things for people and I could go to the store and say that, â€Å"I designed that! † 2. Was mechanical engineering your first choice as a major or was it a second option? Mechanical engineering was, in fact, my first choice of major. Right from my junior year in high school I was destined to be a mechanical engineer. 3. What sub-topic of mechanical engineering do you prefer the most? Why? I like all details of my job. I specifically like when I can put all the components of a product together in the Pro-E program. . What can a person like you contribute to a company such as Vocollect? I am pretty much the person who puts all of the parts together so the company and the customer can view what they want. I pretty much make the final drawing of the product and my boss puts his input in and I make changes. The final drawing then gets sent to the customer for a pproval and then we manufacture the product. So I am a pretty big factor in the company. 5. How would you approach a problem/set back that this field would present to you? Most of the problems that I have are with the computer program. It will always crash and close before I get the chance to save my work. I call tech support but whatever they do never works. Another problem that I may encounter would be when my co-workers/boss have revisions for a certain part of a product drawing. We have a meeting specifically for this. We go through every square inch of the drawing and everyone says what they think they’d do to improve on the drawing. I take notes on their improvements and then after the meetings I go back to my office and revise the drawing to suit their needs. 6. Is this your ideal/dream job? If not, what would it be? My ideal/dream job would have to be the president of the United States. I always wanted to have such immense power. I wanted to become president until I found out that they don’t get paid an entirely large amount of money. And that my public speaking skills aren’t that great so, I would not do well in getting the American people to vote for me. The job I have now is my true job. It’s where I am destined to be, in my opinion. I’ve come to know some really great people from working at Vocollect. 7. What are your short-term and long-term goals as an employee of Vocollect? My short-term goals is hoping that the Chinese company were designing this headset for will be pleased with the design. Once they approve of the drawings, it’ll feel like a weight has been lifted off my shoulders. I’ve been working on this project for almost a year now. It’s sort of a bittersweet moment that the project is almost over, in my area of expertise. As for any long-term goals, I have none yet at the moment. When I get my next design project, my goal will to get the designs done within the given amount of time. 8. Where do you see yourself in five years’ time? In five years, I see myself sitting in this same seat. I have no plans for moving up in the company ladder. I’m perfectly content with where I’m at now. 9. If you were needed to relocate across the country, Oregon, would you accept the offer? Why or why not? Even though this hasn’t been a something on my mind, yet (knock on wood), I believe that I would not take the opportunity for the fact that I would have to give up my friends and family for my job. You can always find another job, but you can’t find another best friend. Even if it was for a significant increase in my pay, I would not take the offer. 10. How did your schooling in college prepare you to be a mechanical engineer for Vocollect? My schooling prepared me immensely for my involvement at Vocollect industries. I took two years of undergrad work at the University of Pennsylvania. I then moved up to the main campus of the school to complete my work to earn my bachelor of engineering degree. I am now in pursuit of gaining my masters in order to receive to a bonus in my paycheck. With the amount of schooling I have, I am fairly confident that I’ll be able to do wondrous things for Vocollect. 11. What comes to mind when you think of the word, â€Å"success†? When I think of success, I think of myself being content with my life, i. e. health, financial, etc. Success also means that I’m happy with where I’m at in life. I’m very healthy, I’m financially stable, I have friends who love me dearly. I think that I’m pretty successful in my life, according to my definition. I’m sure if you ask anyone else, they would give you a completely different answer. 12. What kind of outside experiences aided to your success in mechanical engineering? There’s only one notable outside experience that has aided to my success and that’s how I handle with criticism from my co-workers. I slowly came to accepting their criticism after my first project with Vocollect. 13. If you weren’t a mechanical engineer, what other profession would you seek? Why? If I wasn’t a mechanical engineer, I would want to be someone who would work for PennDOT, and that would be a civil engineer. I would want to work for PennDOT mainly because they make so much money and I’m a guy who likes to have money. 14. What would you consider to be your most influential accomplishment? My most influential accomplishment would have to be the day of which I graduated from college. This was a big day for me in that I came to the realization that I can now become a true mechanical engineer. All of my hard work and hours of study has finally paid off. 15. What positions within Vocollect are you hoping to reach or are you content with the position that you’re at now? With the current position I am at now, I am happy with where I’m at. I don’t see myself progressing up the job title chart. If I was to get a promotion, I would have to move to a different part of the office and have to leave my friends who I’ve grown within the company. I don’t think I’m ready for that kind of a change yet. 16. What would be some adjectives that would describe you? Some adjectives to describe me would be: creative, innovative, accepting, and courageous. I think of myself as creative because I have to be able to compile a three-dimensional drawing to present to my bosses. I’m innovative in that I can take an existing product on the market and make changes to it to make it better. I’m accepting in that I can accept people’s (my bosses) criticism and not get overly worked about it. I think of myself as being courageous in that I can take â€Å"leaps of faith† in my drawings depending on the product we’re designing, I’ll try to implement some of my own ideas into the drawing. 17. When on the job hunt, what kind of factors played a role in selecting the right company? In making my decision to work at Vocollect, I thought of mainly two deciding factors. The first one being the amount of money that I’ll be making on an annual basis. I used this factor because I don’t want to be working an insane amount of hours and not getting paid generously for it. With Vocollect, I’m able to make enough money to support myself and I can still have some extra money to do whatever I want to. The other factor in choosing Vocollect was close proximity to my house. Vocollect is less than fifteen minutes from my house. This makes it easy on me for when it comes to fueling my car. This helped very much during the recession a few years back. I saved loads of money just by having only a less than ten mile commute to work. 18. Have you had any previous jobs before this one? If so, what was/were it/they and what made you leave that job? Before finally settling down at working with Vocollect, I worked at Kennywood Park to help me pay my way through college. I left my duties at Kennywood to pursue my career as a mechanical engineer. Working at Kennywood helped me in that how I deal with working with a group of people to do a common job. 19. What was your least favorite and favorite subject(s) while in school? Why? My favorite subject while going through school would have to be my history classes. I liked history because, if it wasn’t for the past, we wouldn’t be here in the present. We need the past to occur, both mistakes and heroics, which shaped our present. My least favorite subject during my high school career would have to be my math classes. I never liked working with variables and problems that took more than ten minutes to do or an entire page to do. I also didn’t like my English classes. It was a difficulty for me to understand what I was reading for just about every story we read. 20. What went into your decision making process when prompted the question, â€Å"What do you want to be when you grow up? † When I first heard of this question, when I was 10, I wanted to be a professional baseball player since I played baseball. As I grew up it slowly developed to working with machines. Then, finally, it became that I wanted to be an engineer. I went after the fact that I wanted to be a mechanical engineer to find a job to get me through high school and college. I was lucky enough to land me a job at Kennywood Park my junior year in high school. I worked there through the rest of high school and throughout my four years of college. Lucky for me, working at Kennywood helped me in understanding how a complex machine, such as a roller coaster, works and functions under such intense forces. 21. What role does technology play in mechanical engineering? Technology plays an important role in mechanical engineering for various reasons. For what I do, without the use of technology, I would have to draw all of my designs by hand which would be a pain in the backside because; my art skills aren’t that great and no one would be able to understand what I draw. With technology, I’m able to take my three-dimensional drawing in the Pro-E program and take it down to a three-dimensional printer and create a prototype of the product to see my drawing in reality instead of through a computer screen. I’ll admit that there are times that I wish I would free-hand my drawings instead of on the computer (whenever the program crashes). And there are times were I just lose track of time by drawing on the computer. Conclusion Conclusion With the combination of job shadowing and researching what goes on in the mechanical engineering field, I can say that I am pleased with what I will be able to do in my near future. After job shadowing a true mechanical engineer to get a feel of what I will be doing, I can honestly say that I can see myself being a mechanical engineer. After doing much intensive research, my amount of salary on an annual basis will be sufficient in repaying my student loans before I turn thirty, my primary objective once I get out of college. I feel that being a mechanical engineer could be really interesting since I get to render two-dimensional objects and envision them in the third-dimension. I did, believe it or not, think about a different job, but I’m hoping I don’t have to go to that resort. I only thought about this for a roughly short amount of time. I thought about how I could possibly be a structural engineer. This, I think, will act as my fallback option in case if I don’t make in the mechanical engineering field. At first, I wanted to be a structural engineer, believe it or not, but then I did some of my own separate research and found out that there aren’t too many job openings that are within fifty miles of Pittsburgh. Then, with that job plan on the â€Å"back burner†, I decided that I wanted to be the next best thing, a mechanical engineer. As I did some of my own research about mechanical engineering to find that there are several job openings that are within a twenty mile radius of the city of Pittsburgh. After doing this research, I immediately turned my attention to becoming a mechanical engineer and seeing which colleges would offer me the opportunity to get a degree in mechanical engineering. I feel that I could provide the mechanical engineering world with great knowledge of usage of technology that goes into mechanical engineering. ? Career Plan Career Plan Starting with right after graduation, my parents and family are rewarding my twelve years of hard work by accompanying me on a trip to Disney in Orlando, Florida. When I get back home, I will be on the job hunt to hopefully pay for some of my college tuition. During the summer, I hope to find an internship at some company that would further enhance my knowledge of mechanical engineering even before I go to college. Some obstacles that will probably keep my ego down would be the fact that I get bored too easily with one thing. I will have to overcome this obstacle if I want to become a mechanical engineer since most of their day involves someone sitting at a computer all day. I hope that this weakness of mine won’t play a negative role in my future. For example, I wouldn’t want my short attention span to make me change my choice of a major because I got bored with what I was doing. If it happens, it happens. You can’t mess around with what fate has to say about your life choices. I think the most training I would get to become a mechanical engineer would be from a college of engineering. Since that school would specifically be focused on engineering. After this said training in college, I hope to be able to jump right into a job that will have a good salary. As long as I’m a mechanical engineer, it doesn’t matter what the pay is. What matters is that I’ll be satisfied with myself of where I came thus far. I also hope that with a modest salary, I’ll hopefully be able to pay off any student loans of which I may acquire during my time in college. In conclusion, I’ll be happy with whatever company I work for as long as I’m long as I get to do something that involves mechanical engineering. Article â€Å"A† Summary Patrick Rogers’ article, â€Å"Vertical Leap† is an interesting article about the evolution of mechanical engineering through an example that is used in our everyday lives, an elevator. The elevator as we know today wasn’t invented until 1852 by an Elisha Graves Otis. Today’s elevators now come in all sizes and shapes to suit our everyday needs, to give a perspective as to where this engineering feat has gone in the past 150 years. The whole idea of a skyscraper is linked to the elevator itself because, no one would want to climb up fifty flights of stairs to get to their offices day in and day out. Elevators have been used upon many occasions by many notable monarchs over the course of history. For example, Louis XV had an elevator constructed at his palace in Versailles to whisk him around to all sorts of the castle because the castle was of enormous size. As the evolution of machines progressed, the use of â€Å"muscle power† was being drawn out after being used since the Industrial Revolution. Otis displayed the elevator invention to the world at America’s first world’s fair in New York in 1854. Everyone who saw the exhibit was in awe of its sleek design. The invention of the elevator almost didn’t happen because, Otis was in financial ruins and thought about leaving New York to go west to the Gold Rush in hopes that he would get rich off that. Otis’ exhibit displayed him on the platform of one of his steam-driven hoist and slowly began to rise above the crowd, awing them all. When Otis died in 1861, he left his heirs in financial debt but, he left his schematics of an elevator that was constructed so that if the rope breaks from the platform, it cannot freefall to the ground. A new man to the scene by the name of, Otis Tufts (no relation to previous Otis), developed upon Otis’ previous ideas to create an elevator that was roomy enough to carry up to a dozen guests. Reliable steam lifts soon adorned the lobbies of hotels throughout much of the U. S. and thus, the elevator had become a new material item in which business-owners could employ in their stores to move people throughout their store more efficiently. It wasn’t until 1870 that the thought of a silent elevator had begun to surface. Prior to 1870, elevators were powered by large steam pistons and pulleys which were loud and annoying for tenants of apartments of lived on the lower levels of the building. Especially dramatic was the transformations of major cities throughout the country. Many cities began construction on skyscrapers, capable of using elevators. The construction of the Otis elevator can still be viewed, not in a building, but in a home in North Carolina. This shows that Otis’ designs were able to withstand the test of time. In the 1800s, the thought of using panoramic views as a mean of romance wasn’t thought of. The Golden Age of elevators didn’t occur until the 20th century, when the world was beginning to look ahead to the future. In 1903, Otis introduced a gearless traction elevator, a quantum leap for the time. With this new elevator contraption, the secret to building true skyscrapers was defined, by eliminating the need for the cumbersome winding drums. During the Jazz Age, elevator design seemed to pulsate with the energy of the time period. The next big improvement of the elevator came when people figured out how to manage the flow of people on and off of elevators. These people, known as operators, became a popular breed of people. Improvements in technology of the elevator came during World War II by a team of Otis aiding Westinghouse, Cmp. Otis’ work could be compared to that of Henry Ford in the automobile industry. Every so often, Otis et al would try and come up with ways to improve on the previous design of the elevator. Sort of like how Apple does with their iOS devices. Today, cranes hoist the metal gears into place and construction workers assemble the shaft on the job site. The cost of a full elevator system could run you about in excess of fifteen million dollars. Article â€Å"B† Summary James Lissaint’s article, entitled, â€Å"Mechanical Engineering and Why We Need It† encompasses the true value of mecahnical engineering and the progression of the field. He also describes how the field will be able to grow in the future, as long as there is an interest for it. Mechanical engineering, when talking about it, is a very broad topic. There are many subdivisions within the field itself. Mecahnical engineering is vital in the construction of large structures (i. e. skyscrapers, bridges, etc. ) as well as new-age gadgets. This form of engineering can be dated back to ancient Greek, with their invention of the steam engine. It came to the center of discussion and modern society during the Industrial Revolution. Since its beginning, this field has undergone numerous enhancements thanks in part to the advancements in modern technology. With the help of high school physics, a small understanding of mechanical engineering basics will be known in the form of kinematics and mechanics. Mechanical engineering looks at engines in several different, yet efficient, ways. For starters, the steam engine helped to develop the world into a modern society. The idea that the steam engine could be used in motor vehicles really helped the development of transportation systems. Since then, a wide variety of engines have been produced, with diesel and petrol being the most common forms of an engine. It’s essential to know that mechanical engineering is a very broad field with many different subfields that interconnect with one another. Modern society has progressed with topics such as robotics, thermodynamics, and kinematics. The most technical field of mechanical engineering is robotics. These robots, neither human nor animals, are used in a number of practical applications throughout the manufacturingn industry. Lots of companies look for the involvemnt of robots to aide in their assembly line to quicken their production speed to gain a higher profit. Mechanical engineering plays a major role in how, and if, the robot will be able to function properly. June 24, 2016 Sean Robertson Engineer Aerotek CE 15200 Santa Fe Trail Drive, Suite 100 Lenexa, KS, 66219 Dear Mr. Robertson, Having done an internship for your company for the past two years, I believe that my involvement in your company would be a positive thing. Once I heard that there would be a job opening at the time of my completion of my internship, I immediately started to think out my options for the future. With my internship nearly complete, it is time that I look for a full-time job and this was the first company I thought of working for. Through my schooling at Temple University, I feel that I would be an excellent addition to Aerotek as an engineer. Temple was able to provide me with the necessary knowledge to further my interest in engineering. With a â€Å"big-name† company like Aerotek, I thought it would be rather fascinating to work for your company. And with my experience with all the design programs, I believe I could be a key asset for Aerotek’s future in the engineering world. I believe that I would be the best fit for the position because; when I was young I knew that I wanted to be a structural engineer. I was destined to be one, per say. While I was in high school, I worked for Kennywood Park in West Mifflin, Pennsylvania as a ride operator. My duties included making sure the park’s several roller coasters were structurally safe for the days Anschluss of people and forces being applied to it. A major accomplishment of mine would be that in my entire two years of working there, none of the rides I inspected the morning before the park opened, never broke down. This won me an award known as the Most Reliable Worker. I won this both years I worked there. I would be ecstatic if I was selected to hold this position at Aerotek. The best time frame to reach me for a personal interview is when I’m off for holiday break, December 12 thru January 6. I hope that we’ll be meeting in the near future. Sincerely, Objective: A mechanical engineer were my experience in 3-D CAD, GD&T design, and a solid edge modeling experience would be sufficiently tested. Strengths: * Excellent use of a three-dimensional CAD. * Ability to work under strict time constraints * Ability to work in Excel to provide accurate budgets for each project * Works more efficiently under stressful conditions Ability to keep up with improvements in technology in the ever-growing field Honors: * Product launch: newer headset for manufacturing industry * Article publication: â€Å"Engineers of Today† * High honors, Penn State University School of engineering * Internship: Vocollect industries Employment: Internship: Mechanical Engineering, 2012-Present Vocollect Industries, Penn Hills, Pennsylvania. Aided in drafting various prod ucts for customers around the world. Gave in my words of advice during meetings about each product drawing. Brought more business to the company by my propaganda skills. Ride Operator: 2009-2012 Kennywood Park, West Mifflin, Pennsylvania- observed and repaired roller coaster and thrill rides throughout the park on a daily basis from early May to late September; working at least 10-hour shifts daily during the summer months. Rides were at peak performance whenever I was on the clock. Education: June 2016: School of Engineering, University of Pennsylvania, State College, Pennsylvania B. A. in Mechanical Engineering Specialization: 3D CAD program Bibliography Bibliography Aerotek. Advertisement. Structural Engineer Job in Overland Park. Aertek. Monster. com, 31 Aug. 2011. Web. 21 Sept. 2011. . Bureau of Labor Statistics, U. S. Department of Labor, Occupational Outlook Handbook, 2010-11 Edition, Engineers, on the Internet at http://www. bls. gov/oco/ocos027. htm (visited September 21,2011) Camenson, Blythe. Real People Working in Engineering. Lincolnwood, IL: VGM Career Horizons, 1998. Print. Dick, Chris J. â€Å"Job Shadowing. † Personal interview. 23 Nov. 2011. Hutchinson, Jonathon. â€Å"Mechanical Engineering Job Outlook: Employment and Salary Information. † Job Outlook: Employment and Salary. Online Degrees, 2006. Web. 23 Sept. 2011. http://www. onlinedegrees. org/calculator/salary/mechanical-engineers Lissaint, James. â€Å"Mechanical Engineering and Why We Need It. † gEzine Articles, 2011. Web. 4 Nov. 2011. . Rogers, Patrick. â€Å"Vertical Leap. † Preservation. May/June 1998: 52-61. SIRS Renaissance. Web. 23 Sept. 2011. Vocollect. Advertisement. Mechanical Engineer-Design Engineer-Engineer. Monster. com, 21 Sept. 2011. Web. 21 Sept. 2011. .

Emily Dickinson Essay

Emily Dickinson’s place in history has affected many aspects of social order. Dickinson’s writing touched on many issues that were very important to the life and development of Dickinson’s persona; such as religion, war, psychosis, and love. Dickinson’s insight into these issues has been the source of the majority of the interest in her work. Emily Dickenson, throughout her life, sought a personal understanding of God and his place within her life. Her place within the Calvinist Puritan Amherst, however, would not allow for her inquiry into the understanding of the nature of God other than within their specific doctrine. In her childhood Emily Dickenson was shy and already different from the others. Like all the Dickinson children, male or female, Emily was sent for formal education to Amherst Academy. Dickenson began to develop into a free willed person. Many of her friends had converted to Christianity, and her family was also exerting enormous amount of pressure on her to convert. Her father, along with the rest of the family, had become Christians and she alone decided to rebel against that and reject the Church. She had rejected the traditional views in life and adopted the new transcendental outlook. Dickenson’s questioning about God began at an early age. â€Å"Once (to Higginson) she recorded another bit of mystification at adult behavior†. (Sewell 326) As Sewell recounts, Dickinson’s reservations about the nature of God began as early as her genius. As a child, we are told Dickenson felt a disturbance in the speech of a clergyman during as funeral. â€Å"[She was] disturbed by the clergyman’s question, ‘Is the Arm of the Lord shortened that it cannot save? ’†(Sewell 326) Dickinson’s poetry is a window into her quest for this understanding. In poem number 1241, Dickinson concentrates on nature and its relativity to science. Dickinson looks upon a lilac in the late light of a setting sun. Set on a hill, it receives the last light of day, and subsequently, is the last thing that God sees of that day. The sun is given the action of intending the lilac to be meant for â€Å"Contemplation – not to Touch†. I think this is an allusion to the Calvinist ideal of seeking God through action. Dickinson felt that the actions of the church that surrounded her were hollow and led one no closer to understanding the true nature of God than she had attained in her poetic questionings. The flower is given, above humanity, the focus of God’s eye. â€Å"The scientist of Faith† that Dickinson speaks of in this poem is denied any furthering of his understanding when she says: â€Å"His research has but just begun – / Above his synthesis / The Flora unimpeachable / To Time’s Analysis’’. Here, Dickinson is saying that it is not through active searching that one will find the true nature of God, but in the witnessing of His actions—such as the creation of lilacs. She ends the poem with the line â€Å"Eye hath not seen† may possibly / Be current with the blind / But let not Revelation / By theses be detained†. This tells the reader that Dickinson felt that the active search for God, (with the eye) will fail. However, the â€Å"blind† will not have their revelations detained. In the poem #564 Dickinson centers on the physical building of churches as a problem with her understanding of God. Within this poem Dickinson tells the reader that the deification of the man made houses of worship also distract from one’s understanding of God. The line â€Å"God grows above—so those who pray / Horizons—must ascend† illustrates Dickinson’s idea that limiting one’s view, as in focusing on a building rather than God himself, would hinder one’s ability to see God. Dickinson goes on to clarify, succinctly, her feelings on the worshiping of God through churches: â€Å"His house was not—no sign had He / By Chimney—nor by Door / Could I infer his Residence— / Vast Prairies of Air† Dickinson tells the reader that nothing tangible or built by the hand of man has been seen by God as His house. Dickenson contends that there is a separation between â€Å"praying and â€Å"worshipping†. The churches used by the people around Dickinson are used to â€Å"worship† and show the action of belief. Whereas praying is the only way to â€Å"reach† God and prove one’s heart as a believer. In the poem numbered 1499, Dickinson again questions the physical place worship by calling insecure the â€Å"Physiognomy† of the Calvinist theology. Dickinson begins this poem by acknowledging the temporality of the human visage: â€Å"How firm Eternity must look / To Crumbling men†. Dickinson obviously feels that the â€Å"face value† of religion is passing and worthless. She felt that the eternality of action and the long lasting effects of true faith were far more important and worth while. The questions raised by Emily Dickenson within her poetry, echoes the problems that people have had with religion for ages—where does the truth about God reside? Dickenson wanted to find a peace that accompanied the acceptance of God; however her exposure to the Calvinist Puritans stifled that. Her distain and mistrust from the sect resounded throughout her life and her poetry. Though not all of her poetry maintained such as hard line rejection of Puritan ideals, the ones selected here illustrate her desire to find something else, outside of the Calvinist dogma that better explained to her the nature of God. It has been â€Å"suggested that [the] contradictions in Emily Dickinson [‘s poetry] were due to her dual nature, which made her at once a pagan and a â€Å"sincerely religious woman. † (Voigt 193) This constant pull within her life, caused Dickinson to struggle throughout her lifetime with her desire to loved by God, and her inability to accept the blind faith that accompanies devotion to religion. The several poems that I am looking at are examples of how Emily Dickinson’s lack of center and acceptance manifested itself into poetry. In poem numbered 315, for example, the fumbling of the unnamed â€Å"he† at the soul of the narrator is immediately seen as the ultimate of personal invasions. The hap-hazard bumbling of this â€Å"he† is made worse by the â€Å"stun[ning]† that is caused by this invasion. The different degrees of this stunned soul hints at the multiple levels of invasion that is taking place—emotional, physical and, presumably, spiritual. The objectifying human â€Å"Nature† as brittle is an obvious tool to illustrate the suffering that humanity is plagued with throughout their lives. It also brings in the idea of death and mortality to the concept of human existence. The â€Å"he† deals the final blow the brittle human narrator with â€Å"One – Imperial – Thunderbolt† (315. 11) This assumed death, however, does not promise an escape from the constant suffering of life, but instead we learn that â€Å"The Universe – is still –â€Å" (315. 12) The final dash after â€Å"still† tells the reader that the universe is still moving, turning, and continuing the pain that the narrator wishes to be freed from. The Civil War was another issue that was addressed by Dickinson. With the poem, â€Å"The name – of it – is ‘Autumn’†, Dickinson uses natural imagery to describe the horrors of war. David Cody wrote, in his article on the poem, that Dickinson’s poem continues both to beckon and to baffle its readers, and the present essay is devoted not so much to an attempt to â€Å"guess† its meaning as to the more modest task of recalling or reviving, palingenetically as it were, some faint ghost or echo at least of the rich, complex and increasingly remote cultural moment in which it came into being. Precisely because it seems to embody. (Cody 24) Ed Folsom wrote that her poem, numbered 754 â€Å"My Life has stood – a loaded gun†; â€Å"explicitly with the Master/slave relationship†. (Folsom) The poem identifies with the slave’s reality of being worthless until pressed into service by the master. The work that Dickinson did during her lifetime was as diversely inspired as it was cryptic. However, the subjects that were covered by her work still hold enough interest and importance to warrant a continued study. The questions that Dickinson raised about religion, echoed the questions of many people who were slowly becoming disenfranchised with the Calvinist movement. Her own issues with psychosis were also subject to her eye. The poems she wrote about her lack of understanding of the world, and the fear that kept her secluded from society offer a deep insight into her mind. WORK CITED The Complete Poems of Emily Dickenson. Johnson, Thomas H. Ed. Little Brown and Co. New York. 1961. The Inner Life of Emily Dickinson. Voigt, Gilbert P. College English. Vol. 3. No. 2. (Nov. 1941). 192-196. The Life of Emily Dickinson. Sewell, Richard Benson. Harvard University Press. Cambridge, MA. 1994. Emily Dickinson: Selected Letters, ed. by Thomas H. Johnson and Theodora Ward. Cambridge MA. Harvard University Press. 1958. Cody, David â€Å"Blood in the Basin: The Civil War in Emily Dickinson â€Å"The name of it is Autumn â€Å"† The Emily Dickinson Journal. The Johns Hopkins University Press. Volume 12, Number 1, Spring 2003, pp. 25-52 Folsom, Ed. â€Å"Walt Whitman, Emily Dickinson, and the Civil War†. University of Iowa. 2003. Date of Access: July 26, 2006. URL: http://www. classroomelectric. org/volume2/folsom/

Report detailing an analysis of Gary Tredwells Cash Flow Essays

Report detailing an analysis of Gary Tredwells Cash Flow Essays Report detailing an analysis of Gary Tredwells Cash Flow Essay Report detailing an analysis of Gary Tredwells Cash Flow Essay In this report, I will be breaking down your cash flow forecast in detail and will be making suggestions and pointing out problems and telling you how I would change them. A cash flow forecast is a statement that shows the expected movements of the cash in and out of a business. It is normally prepared on a 12 month basis but predictions will more than likely be done on a monthly basis. Cash Inflows: Jan Feb Mar Apr May June July Aug Sep Oct Nov Dec 16850 1900 2600 3000 3200 3600 3700 3900 4000 4100 4200 4500 Cash out flows: Jan Feb Mar Apr May June July Aug Sep Oct Nov Dec 16950 1610 3190 3470 3480 3630 3880 3785 3905 4045 3975 4155 This shows cash inflows from January to December compared with the outflows from January to December I will be using these figures to make recommendation for the issues that I have found. Cash inflows: Sales: Issue: At the start it looks like you have good sales. However you outflow started to become higher than your sales you can see this in six of the months on the statement. Your sales gradually increase towards august and is positive but not by a lot, only by à ¯Ã‚ ¿Ã‚ ½115, unfortunately you are still left with a negative closing balance. Credit Sales: Issue: Credit sales this is when a product is sold to a customer on credit, which means they receive the product before they have paid for it, normally the customer will start to pay it off a month after purchase. This method is used to gain more sales. In your business case selling on credit has gained your more sales as credit sales have increased each month the highest point increased to 1500. Credit sales are a bit of a gamble as you can never predict a late or missed payment. However it does increase the inflow on the cash flow statement. Something that you might consider doing is charging people interest if they are late to repay you this way people would be more inclined to pay you on time. Also it means that if you have to pay interest on a bank overdraft because you dont have the money up front because of a late payment it will then cover your costs. Recommendation: My recommendation would be to increase your prices as you have low sales, this might be essential to your survival and this is your main objective. Potentially you could increase your sales if you did some more advertising. By advertising your business more it will cost you quite a bit of money in the short term. However in the long time I think it will be beneficial. Capital Expenditure: Fixed assets: Issue: You have spent a lot of money on your fixed assets, as this is your first business it is essential that you buy equipment that is needed for you to succeed, as they will hopefully last you a long time. I have noticed that you have spent à ¯Ã‚ ¿Ã‚ ½400 on a trolley jack, there are also I few other that you have spent a lot of money on some of which I dont think were really necessary. This money could have been better spent in other areas of the business. Recommendation: Instead of buying all of your equipment and spending a lot of money in one go it might benefit you more if you had rented equipment like the trolley jack and just brought the essential equipment. This is more expensive in the long term but more beneficial in the short term. This will take half of the capital introduced to the business at the start of the month. This is because you will be paying small amounts each month for the equipment instead of a huge lump some at the beginning. Revenue Expenditure Overheads: Issue: General expenses consist of things like rent, gas, electricity, insurance and power. At the moment you are paying à ¯Ã‚ ¿Ã‚ ½200 a month for your rent this is a very good price and only à ¯Ã‚ ¿Ã‚ ½150 every three months for you light and power which is also very reasonable. Your material costs are at a reasonable price but your sales should be doubling the money you spent so this shows like I said early that you should put your prices up. As the prices are reasonable I am sure you shouldnt have to much difficulty keeping up with payments. However your telephone bill is à ¯Ã‚ ¿Ã‚ ½200 a month which is the equivalent of à ¯Ã‚ ¿Ã‚ ½2400 a year you need to keep this bill as low as possible as it is costing you a lot. Recommendation: There are only a couple of things I can think of that will benefit you in this area the first would be to contact your supplier and see if you could start buying in bulk this would cost you more in the short term but would be less in the long term. The other suggestion I would make is to change to a contract mobile for the business look for one with unlimited calls this would cost around à ¯Ã‚ ¿Ã‚ ½50 a month, as you are spending on average à ¯Ã‚ ¿Ã‚ ½200 a month this would save you à ¯Ã‚ ¿Ã‚ ½150 a month which is à ¯Ã‚ ¿Ã‚ ½1800 a year. Personal Drawings: Issue: At the moment you are taking over à ¯Ã‚ ¿Ã‚ ½1000 a month for your self, I am sure this is what you deserve for the work you do. It would benefit the business if you tried to cut this down if possible. Recommendation: Your business will consistently stay negative unless you cut down on the à ¯Ã‚ ¿Ã‚ ½1010 you earn a month. Net Cash Flow: Issue: The difference between the cash inflow and outflow of the business is called the net cash flow. Your expenditure is higher than it should be as a result of this your business was only positive once in the first seven months. Also you used up the capital introduced of à ¯Ã‚ ¿Ã‚ ½16000 before the second month which is not good. Recommendation You need to reduce your expenditure in order to survive. From what I see you have a lot of expenses to sales. You could start up new methods of selling your product such as advertising, cold calling set up an internet site. Closing Balance Issue: Jan Feb Mar Apr May June July Aug Sep Oct Nov Dec 100 390 -200 -670 -280 -310 -490 -375 -280 -225 0 345 The figures above show your closing balance. Unfortunately for you the majority are negative. However towards the end of the year it is looking better which means if you can keep this going your business has a high chance of survival. You need to keep your closing balance positive because when applying for a bank loan the cash flow forecast for you business is one of the things that they will look at. Recommendation: In the first couple of months as you can see your business isnt doing to great but if you follow the recommendations I have suggested then hopefully your business will turn around like it has started to do in December. If the closing is consistently kept positive then applying for a loan will be essential for the business as it could be used to invest in to the business. However at the moment you would not be able to apply for a bank loan as the majority of months are negative.

the neem tree essays

the neem tree essays Azadirachta indica, Meliaceae, nim or neem tree, margosa tree. Tree from SE Asia and East Indies yielding an antiseptic resin used medicinally and in toothpaste, soaps, and lotions. Location: near mauka-Diamond Head corner of Burns Hall. AGRICULTURE: Neem has been reported to control at least 125 species of pest insects, mites and nenatodes, including 25 species of Coleoptera (beetles), 10 species of Diptera (flies), 25 species of Leptdoptera (moths) and 9 species of Orthoptera (locusts). Farmers in developing countries to control pests on crops have used homemade preparations of neem seeds and leaves for many years. Neem oil has been the subject of a large number of investigations to evaluate the potential of its insecticidal, fungicidal, molluscidal, antiviral and insect antifeeding properties in agriculture. Neem oil is derived by pressing the seed kernels of the neem tree. It is very bitter with a garlic/sulfur smell. A single seed may contain up to 50 percent oil by weight. Neem oil is an excellent moisturizing oil and contains various compounds that have insecticidal and medicinal properties. It is used in making shampoos, toothpaste, soaps, cosmetics, mosquito repellants, creams and lotions, pet products like pet shampoo, etc. It also contains vitamin E, other essential amino acids and some percentages of fatty acids. Neem oil is used for treating many skin diseases viz. eczema, psoriasis, skin allergies, etc. and is being studied for making contraceptives in India. Oil: Neem oil derived from crushing the seeds is antidermatonic, a powerful anthelmintic and is bitter in taste. It has a wide spectrum of action and is highly medicinal in nature. NEEM INSECTISIDE : 90% Neem Oil 10% inerts. A novel insecticide derived from a neem seed extract comprising neem oil which is substantially free of azadirachtin, said neem oil being prepared by extracting dried, coarsely ground neem seeds with a non-polar, hydrophobic so...

Canadian Parliament Buildings Fire of 1916

Canadian Parliament Buildings Fire of 1916 While World War I was raging in Europe, the Canadian Parliament Buildings in Ottawa caught fire on a freezing February night in 1916. With the exception of the Library of Parliament, the Centre Block of the Parliament Buildings was destroyed and seven people died. Rumors were rife that the Parliament Buildings fire was caused by enemy sabotage, but a Royal Commission into the fire concluded that the cause was accidental. Date of the Parliament Buildings Fire February 3, 1916 Location of the Parliament Buildings Fire Ottawa, Ontario Background of the Canadian Parliament Buildings The Canadian Parliament Buildings consist of the Centre Block, the Library of Parliament, the West Block and the East Block. The Centre Block and Library of Parliament sit at the highest point on Parliament Hill with a steep escarpment down to the Ottawa River at the back. The West Block and East Block sit down the hill on each side at the front of the Centre Block with a large grassy expanse in the middle. The original Parliament Buildings were built between 1859 and 1866, just in time to be used as the seat of government for the new Dominion of Canada in 1867. Cause of the Parliament Buildings Fire The exact cause of the Parliament Buildings fire was never pinpointed, but the Royal Commission investigating the fire ruled out enemy sabotage. Fire safety was inadequate in the Parliament Buildings and the most likely cause was careless smoking in the House of Commons Reading Room. Casualties in the Parliament Buildings Fire Seven people died in the Parliament Buildings fire: Two guests of House Speaker Albert Sà ©vigny and his wife returned to get their fur coats and were found dead in a corridor.A policeman and two government employees were crushed by a fallen wall.Bowman Brown Law, the Liberal member of parliament for Yarmouth, Nova Scotia died near the House of Commons Reading Room.The body of Renà © Laplante, Assistant Clerk of the House of Commons, was found in the building two days after the fire. Summary of the Parliament Buildings Fire Shortly before 9 p.m. on February 3, 1916, a member of parliament noticed smoke in the House of Commons Reading Room in the Centre Block of the Parliament Buildings.The fire quickly raced out of control.The House of Commons was interrupted in the middle of a debate on fish marketing.Prime Minister Robert Borden was in his office when he was alerted to the fire. He escaped down a messengers stairway through thick smoke and flames. His office was badly damaged, but some papers on his desk were not touched.Major-General Sam Hughes, who was down the street at the Chà ¢teau Laurier hotel when he heard about the fire, called in the local 77th Battalion to provide crowd control and help with the evacuation.At 9:30 p.n. the roof of the House of Commons collapsed.Senators and soldiers rescued some historic paintings from the Senate before the fire spread to it.By 11:00 p.m. the Victoria Clock Tower had caught on fire, and by midnight the clock was silent. At 1:21 a.m. the tower fell.By 3:00 a.m. the fire was mostly under control, although there was another outbreak the next morning. The Centre Block was a smoking shell filled with icy rubble, with the exception of the Library of Parliament.The Library of Parliament had been built with iron safety doors, which were slammed shut against the fire and smoke. A narrow corridor separating the Library from the Centre Block also contributed to the Librarys survival.After the fire, the Victoria Memorial Museum (now the Canadian Museum of Nature)  cleared its exhibition galleries to make room for parliamentarians to meet and work. On the morning after the fire, the museums auditorium was converted into a temporary House of Commons Chamber, and that afternoon, members of parliament conducted business there.Rebuilding the Parliament Buildings began quickly even though there was a war on. The first parliament sat in the new building on February 26th, 1920, although the Centre Block wasnt completed until 1922. The Peace Tower was finished by 1927. See Also: The Halifax Explosion in 1917

Ethical Issues Essay Example | Topics and Well Written Essays - 250 words - 3

Ethical Issues - Essay Example Computers and information systems have become part of human lives and, as a result, have created an opportunity for abuse and misuse hence raising the issue of ethics (Haag & Cummings, 2013). There is an ethical issue relating to the privacy of personal information and increasing concern about storage and access to personal details (Haag & Cummings, 2013). The risk of losing individual privacy affects information system because some people are unwilling to transact online for fear of exposing personal details to unintended persons. On the other organizations are incurring a lot of expenses to protect clients details from unauthorized users. Although organizations cannot fully prevent unauthorized access clients information, they can limit the accessibility by installing security details such as data encryption and use of passwords (Haag & Cummings, 2013). In conclusion, the use of information technology and systems has both positive and negative implications in the society. Although it has improved interactions of persons across the globe, it has caused ethical issues such as loss of privacy through unauthorized access to personal details. Organizations should improve protection of personal information. However, organizations should provide their clients with training on what information they should share and how to protect their privacy against unintended

Journal entry Essay Example | Topics and Well Written Essays - 500 words

Journal entry - Essay Example They will also be motivated to deliver the work on time and ensure that they make the best use of time. To this end, new entries could be added to the existing journal as follows: The budget of the project is a reflection of the resources that are going to be put into the project. This shall not be in terms of monetary spending alone. Rather, several areas of the project that demand human resource, capital resource, time resource and energy resource have all been factored into the budget. Again, the budget does not only make a representation of the needed resources that are going to be invested into the project but expected income is also featured. On the whole, the procurement of equipment is expected to be the component of the project that will have a lot of drain on the budget. This is because only brand new machine parts are going to be purchased. Moreover, spending to be made by the staff is also expected to put a lot of financial on the budget. In all, sale of the engines to be produced will be the major source of capital for the project. The development of the project budget goes with the following entries in the journal: Calculating estimated income that the project will eventually yield when it is completed. The income shall be dictated by factors including time of completion, quality of project and number of pieces of equipment made. As already hinted, the quality of the project will go a long way to determine the income that the project is going to yield. This is because in today’s competitive world where value for money has become the order of the day, consumers and customers of good and products expect nothing less than absolute quality. This is a demand that puts the team under pressure to ensure maximum adherence to quality restrictions. To this end, there shall be a special review to the quality management plan that has already been structured to take care of management of quality issues in the project. The new modification shall

Legalizing Marijuana Research Paper Example | Topics and Well Written Essays - 2000 words - 1

Legalizing Marijuana - Research Paper Example Although there are many voices and opinions about this topic, the legalization of the drug could support a more stable criminal justice system and prevent the consequences of arrest on citizens that far outweigh the nature of the crime. In understanding the argument for the legalization of marijuana, one must first understand what aspects of the drug is relevant to legalization. The cannabis plant is one of the oldest cultivated varieties of plants in the history of the world. There is evidence that shows that the plant was used for both clothing manufacture and for its intoxicating effects, but there is also some evidence to show that it was grown for its food potential as well (Green, 2002, p. 10). The plant has an Asian origin, although scientists have been unable to determine a specific origin as the long history of the plant defies the ability of research to trace it back to an origin. ` The cannabis plant has many uses that go beyond just the use of the leaves as an intoxicant. Henry Ford made a prototype of a vehicle using hemp (the fiber derived from the plant) based plastics for the body which turned out to be stronger than steel. He was also working on a hemp based oil product for fuel (Green, 2002, 17). Hemp fibers can be used to create natural The drug has an infamous quality as there have been tales and myths reported from the results of usage of the intoxicant. From the 13th century there are writings from Marco Polo about a Persian ruler who had disciples who committed religiously motivated murder who were inspired by the use of cannabis. There is a similar contemporary tale of Shiites who recruit assassins who are users of the drug. In a similar vein, there are stories of African white land owners addicting the Bushmen of the area to marijuana as a means of controlling them (Roffman, 2006, p. 6). All these tales describe the worst imaginable horrors that can be

Interpretation of Alexander Pope's Work An Essay of Man

Interpretation of Alexander Pope's Work An of Man - Essay Example He explains that man should have a sense of inner equilibrium, between how he views himself with respect to his surroundings. With this, man has to understand his purpose, as well as the universal order in which he is a part of. Only after understanding his purpose and the universal order around him can a man be truly contented. As Pope explains: The man was made perfect, based on the intended purpose that God created him for. Moreover, God gave man sufficient knowledge, based on the purpose that he was made for, and in relation to the surroundings that he will live in. The author cautions that man should not overshoot his intended purpose. The man was made to be a man and was made perfectly for his intended purpose, with respect to the universal order, of which man is a part of. Therefore, any desire to deviate from man's intended purpose consequently inverts or subverts the universal order that exists: As Pope explains, aspiring to be like the Gods or like the Angels is deemed as a rebellion against the universal order that man should respect. Implicit in this argument is the possibility that man might go astray, away from his intended purpose, should he desire to become more than what he was created for. Effects such as pride, tyranny, and corruption might signal the downfall of the man if he desires to become more than what he was created for. The stress  that the author puts on the importance of understanding man's intended purpose suggests that it is not immediately easy for a man to know his purpose and stature with respect to the universal order. Man, therefore, has to go through a journey of questioning and self-discovery, to understand his true character and purpose. He must understand each positive attribute of his character, to know why he was given such. Moreover, he must also understand each negative attribute of his character, not only to know why he was given such negative attributes, but also for him to overcome it. Pope explains his point further, through the following excerpt.  Ã‚  

(Q5.'Traditional' methods of project procurement have no further use Essay

(Q5.'Traditional' methods of project procurement have no further use within modern construction procurement'; is this so Discuss) - Essay Example Traditional methods of procurement have been the source of an enormous debate in regard to their current suitability especially in this modern era. Are they of any use or not? The paper will examine whether the statement that they have no use for the current construction procurement is right. It has been stated by Adenuga (2013) that the traditional technique of project procurement involves a group of specialized consultants entering into a contractual arrangement with the contractor and the client. The group of specialized consultants may constitute quantity surveyors, engineers, and other professionals. Their role is to oversee the contractor, who works on the real construction, and deliver a suitable design. Normally, the specialized consultants ply their trade in different corporations. However, they come together and offer their expertise to the client for a certain amount of money. The agreed amount is made possible by the bills of quantities. The contractor gets the work after going through a competitive bidding process. In addition, the contractor and the design can be conducted at the same time up to a certain point. However, the cost know-how is not estimated accurately. Under this method, there are cost reimbursement, lump sum, and measurement contracts. The t otal cost of the contract can be assessed as per the definite materials, labor, and plant cost; it can be done before the beginning of the construction through an agreement; or after the construction is complete respectively (Davis, et al., 2008). Do the traditional methods of project procurement have no use in the current procurement method? To determine if this is so, the pros and cons of the traditional forms of project procurement are examined. Under the pros, the client regulates the specialized group of consultants working on the design. Many clients may have familiarity with the methods. The

Interpretation of Alexander Pope's Work An Essay of Man

Interpretation of Alexander Pope's Work An of Man - Essay Example He explains that man should have a sense of inner equilibrium, between how he views himself with respect to his surroundings. With this, man has to understand his purpose, as well as the universal order in which he is a part of. Only after understanding his purpose and the universal order around him can a man be truly contented. As Pope explains: The man was made perfect, based on the intended purpose that God created him for. Moreover, God gave man sufficient knowledge, based on the purpose that he was made for, and in relation to the surroundings that he will live in. The author cautions that man should not overshoot his intended purpose. The man was made to be a man and was made perfectly for his intended purpose, with respect to the universal order, of which man is a part of. Therefore, any desire to deviate from man's intended purpose consequently inverts or subverts the universal order that exists: As Pope explains, aspiring to be like the Gods or like the Angels is deemed as a rebellion against the universal order that man should respect. Implicit in this argument is the possibility that man might go astray, away from his intended purpose, should he desire to become more than what he was created for. Effects such as pride, tyranny, and corruption might signal the downfall of the man if he desires to become more than what he was created for. The stress  that the author puts on the importance of understanding man's intended purpose suggests that it is not immediately easy for a man to know his purpose and stature with respect to the universal order. Man, therefore, has to go through a journey of questioning and self-discovery, to understand his true character and purpose. He must understand each positive attribute of his character, to know why he was given such. Moreover, he must also understand each negative attribute of his character, not only to know why he was given such negative attributes, but also for him to overcome it. Pope explains his point further, through the following excerpt.  Ã‚  

Fs3010c Essay Example | Topics and Well Written Essays - 2000 words

Fs3010c - Essay Example Financial institutions with significantly larger subprime mortgage portfolios therefore faced difficult situations in managing the losses and consequently went out of business owing to large losses sustained as a result of mass scale defaults by subprime borrowers. There are various reasons as to why financial institutions failed and consensus have now emerged that it was the failure of financial regulatory system of developed countries that resulted into the excessive risk taking by financial institutions. This excess risk taking therefore resulted into the failure of some financial institutions. What is also critical is the fact that systematic failure of financial institutions created negative impact on the economy and system as a whole experienced bank runs also. Northern Rock was one of the glaring examples of the failure of financial institution resulted due to imprudent risk management policies and practices. This paper will therefore provide an in-depth overview of the failure of Northern Rock and whether it was due to failure of regulatory agencies? It is generally believed that the financial crisis started as a result of subprime borrowers who failed to pay on their obligations when they became due. Subprime borrowers are those borrowers who normally do not fall into the acceptable category of borrowers due to their poor credit history. However, subprime borrowers also offer an opportunity to financial institutions to earn higher returns because of their high risk and most of the financial institutions jumped on this opportunity and started to lend in subprime market extensively. Most financial institutions however, also securitized their mortgage portfolios including subprime portfolios in order to recoup their liquidity drained as a result of lending to subprime borrowers. Most of financial institutions however, found themselves in trapped in this complex web as their repayment capacity against mortgage baked securities was

The Cash Connection Essay Example for Free

The Cash Connection Essay The payday lending industry is a very competitive industry established in the 1990’s, designed to give citizens the option to receive a quick fix regarding financial issues, in an effort to make ends meet. The main objective for those in the payday loan industry â€Å"should be to serve customers in compliance with the rules of the industry and better educate them on the services and products they offer† (Personal Communications, 2012). This industry raises the controversial topic of ethical, or unethical, and to this day is still being disputed. Cash Connection’s strategy is â€Å"to provide financial products and services to the unbanked and financially underserved customers†(CashConnection. eu), also to set themselves apart their competition with the intention of becoming the most dominant franchise in the lending industry. The lending industry was established to provide citizens in a financial crisis with quick cash loans while adhering to the rules of the industry, and informing them of the importance of wise borrowing. A focused differentiation strategy is defined as â€Å"concentrating on a narrow buyer segment and outcompeting rivals with a product offering that meets the specific tastes and requirements of niche members better than the product offerings of rivals†. Cash Connection is taking this approach by offering attractive features to its customers that its competitors cannot offer. The different characteristics consumers find valuable when searching for a quick cash loan, such as lower interest rates, and larger loans have an impact on the consumer’s purchase decision. Cash Connection uses that to their advantage by focusing their strategy around those features in an effort to become the leading lending franchise in that industry. In the excerpt given by Paul Smith there is evidence that suggests that Cash Connection’s strategy and business model is ethical. â€Å"Individuals taking high interest loans were less likely to be in poverty, less likely to be hungry and less likely to have lost their job† (Personal Communications, 2012). Given this act, high interest loans have had a positive impact on society as a whole. Cash Connection explains the importance of wise borrowing before the customer receives the loan, in hopes of preventing the customer from getting into serious financial trouble, as a fair warning before the transaction is complete. â€Å"For companies that operate within this industry, a main objective should be to serve customers in compliance with the rules of the industry and better educate them on the services and products they offer† (Personal Communications, 2012). Certain liabilities are associated with almost every offered product, for example tobacco companies include a warning regarding the health risks associated with the product, and also, alcohol incorporates the same concept into its products. The evidence that suggests Cash Connection’s strategy and business model lies in the â€Å"Pay Loans Scrutinized† video, regarding a woman who carelessly used the system, and built up dependence for the instant cash received (CBS, 2008). In this video a lady reveals her financial struggles she has acquired through the use of high interest lending loans. She explains how lending loans are to blame for the debt she acquired, and states she would prefer to go without heat, water, and food than be in the financial position she is currently in. She obviously abused the privilege and got herself into a predicament. The only unethical argument that rises is the high interest rates that apply under the terms and conditions, making it difficult for those living in poverty to pay back borrowed money. The dominant economic characteristics that affect the payday lending industry consist of the different rules and regulations imposed by the government. The biggest threat the payday lending industry faces is the possibility of it becoming illegal. â€Å"A state that has permissive usury laws can always change its laws to lower ceilings on payday loan finance charges, or to make payday lending illegal†(Caskey, 2002). Also Caskey states some payday franchises require customers to be enrolled in a job position that provides income, along with a checking account. This can have a major impact on the payday lending industry by ruling out those customers that do not fit the necessary requirements established in order to receive a lending loan. â€Å"The five competitive forces include (1) competition from rival sellers, (2) competition from potential new entrants to the industry, (3) competition from producers of substitute products, (4) supplier bargaining power, and (5) customer bargaining power† (Rollins, 2011). Rivalry among the lending industry is very intense and competitive. Since the 1990’s when this industry was established, competition has been fierce because of â€Å"The exiting of traditional financial institutions from the small-denomination, short-term credit market; a change largely due to its high cost structure,† and â€Å"The soaring cost of bounced checks and overdraft protection fees, late bill payment penalties, and other informal extensions of short-term credit† (Personal Communications, 2012). Competition from new entrants in the industry can impose a serious threat because barriers to entry are so low. The only ingredient necessary to enter this market is access to upfront cash. Competition from producers of substitute products contains the ability to be a serious threat because of the different types of loans that banks offer, along with the different characteristics regarding those loans, such as financing programs. Supplier bargaining power holds moderate strength which lies in the hands of the banks. Banks choose which payday franchise to do business with based on that company’s performance. Without the assistance of banks â€Å"the supplier† there is no opportunity for success, so the supplier bargaining power holds serious strength in determining the success of Cash Connection. Lastly, Customer bargaining power does not hold great power. The rates for each payday business are basically the same, and negotiating is not an option for consumers in this industry. The five forces model reveals that the payday lending industry is not ideal for those wanting to manage a successful business. It is very easy for competitors to enter the market, it is in danger of becoming illegal, competition is fierce, and the market already contains too many. The driving forces that currently affect the payday lending industry differ from tate to state. In South Carolina for example, the maximum loan amount is $550, the loan cannot exceed 31 days, and A licensee shall not charge, directly or indirectly, a fee for other consideration in excess of 15% of the face amount of the check† (Morton, 2012). Also several different acts were implemented by the Federal Government to address the different issues associated with payday lending that have an effect, forcing businesses like Cash Connection to create a strategy and approach that comply with these regulations.

Moringa Oleifera Health Benefits and Nutrition

Moringa Oleifera Health Benefits and Nutrition According to Dr. Lydia M. Marero of the Food and Nutrition Research Institute of the Philippines, Moringa oleifera is one of the worlds most useful plants. It is used as food, effective water treatment, antibiotic, source of oil, and coagulant for turbid waters. Moringa Oleifera has several health benefits that are one of the reasons why it is named the Miracle Tree and the Tree of Life in many cultures. People benefit from Moringa Oleifera both in terms of prevention and healing. Moringa Oleifera is nutritious, natural and energizing. The immature pods are the most valued and widely used of all the tree parts. The pods are extremely nutritious, containing all the essential amino acids along with many vitamins and other nutrients. The immature pod can be eaten raw or prepared like green peas or green beans, while the mature pods are usually fried and possess a peanut-like flavor. The pods also yield 38 40% of non-drying, edible oil known as Ben Oil. This oil is clear, sweet and odorless, and never becomes rancid. Overall, its nutritional value most closely resembles olive oil. The root is used as pickle. The leaves are eaten as greens, in salads, in vegetable curries, as pickles and for seasoning. The Bark can be used for tanning and also y ields a coarse fiber. The flowers, which must be cooked, are eaten either mixed with other foods or fried in batter and have been shown to be rich in potassium and calcium. Moringa Oleiferas on Dr. Oz Show These are some of the uses of Moringa Oleifera: Moringa Oleifera for Diabetes Relief Moringa Oleifera for Healthy Skin Moringa Oleifera for Nutrition Moringa Oleifera to sleep better Moringa Oleifera for decreased depression and anxiety Moringa Oleifera  contains more than 92 nutrients and 46 types of antioxidants. Moringa leaves contain all the essential amino acids to build strong healthy bodies. Moringa  is said to cure about three hundred diseases and almost have all the vitamins found in fruits and vegetables. Even in larger proportions. With all the health benefits of this miracle herb, it can easily be termed as the most nutritious herb on Earth. There are no side-effects which also has tried, tested, documented and proved evidence to support the same. Some Facts about Moringa Moringa has following properties: 92 Nutrients 46 Antioxidants 36 Anti-Inflammatories 18 Amino Acids, 9 Essential Amino Acids Nourishes The  Immune System Supports Normal Glucose Levels Natural Anti-Aging Benefits Provides Anti-Inflammatory Support Promotes Healthy Digestion Promotes Heightened Mental Clarity Boosts Energy Without Caffeine Encourages Balanced Metabolism Promotes Softer Skin Provides Relief From Acne Supports Normal Hormone Levels Few Nutritional Value of Moringa Gram-for-gram comparison of nutritional data: 2 times -the Protein of Yogurt 3 times the Potassium of Bananas 4 times the Calcium of Milk 4 times the Vitamin A of Carrots 7 times -the Vitamin C of Oranges The Vitamin and Minerals Component of Moringa  Leaves and Pods Vitamins are soluble either in water or in lipids. They help regulate almost all physiological processes in the body. When any vitamin is absent from the diet the body begins to show signs of deficiency. Minerals are also essential for our health; they are used by our body for building tissues such as bones, teeth, muscles. Some minerals are components of enzymes and help to regulate metabolic function of the body. Lack of minerals in diet can impair normal functioning of the body and may lead to a number of disease. Without enough calcium and phosphorous our bones fail to grow properly. The detail of vitamins and minerals in Moringas fresh dried leaves and its pod are presented in the following tables. Table No. 1: Moringa Oleifera Pods [Raw] Nutritional Value Per 100  g (3.5  oz) Energy 26  kcal Fat 0.10 g Carbohydrates 3.7 g Protein 2.50 g Dietary fiber 4.8 g Water 86.90 g Vitmans Vitamin A equiv. 0.11 mg Calcium 30 mg Thiamine (vit. B1) 0.05 mg Iron 5.3 mg Riboflavin (vit. B2) 0.07 mg Magnesium 24 mg Niacin (vit. B3) 0.20 mg Manganese 0.25 mg Pantothenic acid (B5) 0.79 mg Phosphorus 110 mg Vitamin B6 0.12 mg Potassium 259 mg Folate (vit. B9) 44 ÃŽÂ ¼g Sodium 42 mg Vitamin C 120.0 mg Zinc 0.45 mg Source: USDA Nutrient Database Table No. 2: Moringa Oleifera Leaf Nutrient Composition Calories Fresh Leaves (Value/100g):  92 cal Dried Leaves (Value/24g):  49 cal Macronutrients Protein Fresh Leaves (Value/100g):  6.70 g Dried Leaves (Value/24g):  6.5 g Fat Fresh Leaves (Value/100g):  1.70 g Dried Leaves (Value/24g):  0.55 g Carbohydrates Fresh Leaves (Value/100g):  12.5 g Dried Leaves (Value/24g):  9.2 g Micronutrients Carotene (Vit.A) Fresh Leaves (Value/100g):  6.78 mg Dried Leaves (Value/24g):  4.54 mg Thiamin (B1) Fresh Leaves (Value/100g):  0.06 mg Dried Leaves (Value/24g):  0.63 mg Riboflavin (B2) Fresh Leaves (Value/100g):  0.05 mg Dried Leaves (Value/24g):  4.92 mg Niacin (B3) Fresh Leaves (Value/100g):  0.8 mg Dried Leaves (Value/24g):  1.97 mg Vitamin C Fresh Leaves (Value/100g):  220 mg Dried Leaves (Value/24g):  4.15 mg Calcium Fresh Leaves (Value/100g):  440 mg Dried Leaves (Value/24g):  480.72 mg Copper Fresh Leaves (Value/100g):  0.07 mg Dried Leaves (Value/24g):  0.14 mg Fiber Fresh Leaves (Value/100g):  0.90 g Dried Leaves (Value/24g):  4.61 g Iron Fresh Leaves (Value/100g):  0.85 mg Dried Leaves (Value/24g):  6.77 mg Magnesium Fresh Leaves (Value/100g):  42 mg Dried Leaves (Value/24g):  88.32 mg Phosphorus Fresh Leaves (Value/100g):  70 mg Dried Leaves (Value/24g):  48.96 mg Potassium Fresh Leaves (Value/100g):  259 mg Dried Leaves (Value/24g):  329 mg Zinc Fresh Leaves (Value/100g):  0.16 mg Dried Leaves (Value/24g):  0.79 mg Source: The National Academies Press Amino Acids: The foundation of our body Our bodies need twenty different amino acids or proteins that are the building blocks for a healthy body. Nonessential amino acids are those that the body can synthesize for itself, provided there is enough nitrogen, carbon, hydrogen, and oxygen available. Essential amino acids are those supplied by the diet.   They must be consumed as the human body either cannot make them at all or cannot make them in sufficient quantity to meet its needs. Of the 20 amino acids required by our bodies, eleven of them are nonessential and nine are essential. Functions of Amino Acids: Proteins act as enzymes, hormones, and antibodies. They maintain fluid balance and acid and base balance. They also transport substances such as oxygen, vitamins and minerals to target cells throughout the body. Structural proteins, such as collagen and keratin, are responsible for the formation of bones, teeth, hair, and the outer layer of skin and they help maintain the structure of blood vessels and other tissues. Enzymes are proteins that facilitate chemical reactions without being changed in the process. Hormones (chemical messengers) are proteins that travel to one or more specific target tissues or organs, and many have important regulatory functions. Insulin , for example, plays a key role in regulating the amount of glucose in the blood. The body manufactures antibodies (giant protein molecules), which combat invading antigens. Antigens are usually foreign substances such as bacteria and viruses that have entered the body and could potentially be harmful.If these critical components for a healthy body are not provided as part of a healthy diet, the body will look for other sources for them.   This can include breakdown of our organs, leading to chronic problems such as liver and kidney problems, diabetes and heart disease among others. Moringa as a Food Moringa is considered a complete food as it contains all of the essential Amino Acids required for a healthy body.  The dried leaf is a nutritional powerhouse and contains all of the following Amino Acids. Ann Hirsch, PhD One of the things that impress me most about Moringa is the fact that it has the full complement of the essential amino acids those humans beings need-there are nine of them that we cannot synthesize, so we have to get them from our food. Ann Hirsch, PhD, Professor of Botany at University of California Los Angeles Malnutrition In developing tropical countries, Moringa trees have been used to combat malnutrition, especially among infants and nursing mothers. Three non-governmental organizations in particular Trees for Life, Church World Service and Educational Concerns for Hunger Organization advocate Moringa as natural nutrition for the tropics. Leaves can be eaten fresh, cooked, or stored as dried powder for many months without refrigeration, and without loss of nutritional value. According to Optima of Africa, Ltd., a group that has been working with the tree in Tanzania, 25 grams daily of Moringa Leaf Powder will give a child the following recommended daily allowances: Protein 42%, Calcium 125%, Magnesium 61%, Potassium 41%, Iron 71%, Vitamin A 272%, and Vitamin C 22%. These numbers are particularly astounding; considering this nutrition is available when other food sources may be scarce. Moringa as medicine Scientific research confirms that these humble leaves are a powerhouse of nutritional value. The Moringa tree has great use medicinally both as preventative and treatment. Much of the evidence is anecdotal as there has been little actual scientific research done to support these claims. Indias ancient tradition of ayurveda says the leaves of the Moringa tree prevent 300 diseases. One area in which there has been significant scientific research is the reported antibiotic activity of this tree. Moringa and cancer Findings of a study made in India, which were used as the basis of many news reports on malunggay as a wonder plant, states that moringa contains anti-cancer compounds (phytochemicals) that help stop the growth of cancer cells. Moringa is said to be effective in treating ovarian cancer, among a host of other diseases like arthritis, anemia, heart complications, kidney problems, scurvy, asthma, and digestive disorders (ulcer, gastritis, diarrhea, dysentery). Another area of folklore which research supports is in cancer treatment. Moringa species have long been recognized by folk medicine practitioners as having value in the treatment of tumors. Studies examined certain compounds for their cancer preventive potential. Recently two of these compounds were shown to be potent inhibitors of activation of lymphoblastoid (Burkitts lymphoma) cells. One of these compounds also inhibited tumors in mice bred to be prone to tumors. In another study, Bharali and colleagues examined skin tumor prevention following ingestion of drumstick (Moringa seedpod) extracts. Liver and Moringa Moringa has been observed by scientists to contain unique compounds and enact mechanisms that help purge the liver of these toxins and even reverse the damage that they cause. Silymarin is a flavonoid or specialized molecule found in moringa that has been shown to help reduce the effects of hepatoxins on the liver, improving its resiliency. It also protects the liver from the toxic effects. Moringa has also been observed to be an effective treatment against a wide array of liver diseases, such as both chronic and acute hepatitis, cirrhosis of the liver, fatty degeneration of the liver, and the metabolic liver disease brought about by alcohol and drug use. This is because moringa not only stops the toxicity that causes these diseases, but also helps reverse it. On its own, the liver is a very resilient organ, able to regenerate its cells and grow back even after over half of it is destroyed or removed. Moringa accelerates this regeneration process by about four times the normal speed, eventually helping the liver regain full functionality. Water purification After the oil is extracted from the pods, the seed-cake remaining contains the active components for removing turbidity (solid particles) from water. Because bacteria adhere to the solids, this seed-cake also effectively removes bacteria. At the Thyolo Water Treatment Works in Malawi, Africa, two researchers from the University of Leicester, England, have worked on substituting moringa seeds for alum to remove solids in water for drinking. Conclusions This tree is truly a Miracle Tree offering hope; nutritionally, medicinally and economically to devastatingly poor 3rd world countries. It has just recently begun being used as a supplement in a juice form and in powdered leaf tablets. We are not talking about believing us, the data is already out there to show the benefits of Moringa Oleifera.What has been missing, so far, is the willingness to create awareness about this. In our local language it is called SOHANJNA References: Broin M (2006). The nutrient value of Moringa oleifera Lam. leaves: What can we learn from figure? 2006 Moringa news work shop. http://www.moringanews.org/doc/GB? Posters?Broin_poster.pdf. accessed 18/05/2010. Fahey JW (2005). Moringa oleifera: A review of the Medical evidence for its nutritional, Therapeutic and prophylactic properties. Part 1. http://www.TFLjournal.org/article.php /20051201124931586. accessed 15/03/2010 Anjorin TS, Ikokoh P, Okolo S (2010). Mineral composition of Moringa oleifera leaves, pods and seeds from two regions in Abuja, Nigeria. Int. J. Agric Biol., 12: 431-434. Anwar F, Sajid L, Muhammad A, Anwarul HG (2007). Moringa oleifera: A Food plant with Multiple Medicinal Uses. Phytother. Res., 21: 17-25. Foidl N, Makkar HPS, Becker K (2001). The Potential of Moringa oleifera for Agricultural and industrial uses. What development potential for Moringa products? October 20 th- November 2nd 2001. Dar Es Salaam. Fuglie LJ (2001). Combating malnutrition with Moringa. In: Lowell Fugile, J.(Ed), The Miracle Tree: The Multiple Attributes of Moringa. CTA Publication, Wageningen, The Netherlands, pp. 117-136. Gidamis AB, Panga JT, Sarwatt SV, Chove BE, Shayo NB (2003). Nutrients and anti-nutrient contents in raw and cooked leaves and mature pods of Moringa oleifera, Lam. Ecol. Food Nutr., 42: 399-411. Babu S (2000). Rural nutrition interventions with indigenous plant foods-a case study of vitamin A deficiency in Malawi. Biotechnol. Agron. Soc. Environ., 4(3): 169-179. Barminas JT, Charles M, Emmanuel D (1998). Mineral composition of non-conventional vegetables. Plant Food Hum. Nutri. 53: 29-36.